Welcome to the wiring kits category for the Suzuki Jimny (from around 2018, fourth generation). This compact off-roader impresses with real four-wheel drive, a short body, and excellent off-road capability. It is equipped with a 1.5-litre petrol engine, producing around 102 hp and offering about 130 Nm of torque. Exterior dimensions are approximately 3,625 mm in length, about 1,645 mm in width, and around 1,725 mm in height; wheelbase roughly 2,250-2,300 mm depending on trim.

Your Advantages with Our Jimny Wiring Kits

Vehicle-specific & plug-and-play: Harnesses & connectors are precisely matched to the Jimny’s tail lights, body panels, and bumper – installation with minimal adjustments.
7- or 13-pin variants: The 7-pin wiring kit covers standard lighting functions (indicators, tail & brake lights). For reversing light, trailer use or extra power outlets, a 13-pin kit is recommended.
LED-compatible & error-free: Even with LED taillights or retrofit LED upgrades, our wiring kits avoid flicker or warning messages.
Robust & weather-proof execution: Weather-sealed plugs, corrosion-resistant materials, and protected cable routing—especially in rear and underbody areas—for reliable long-term use.
Standards compliant & safe: All wiring kits meet legal requirements, are TÜV-approved, and certified for use with a trailer hitch.

Technical Notes & What to Check Before Buying

Check your vehicle data: year, engine type (1.5 l petrol), trim level, lighting setup.
Clarify extra functions: reversing lights, trailer connector, power supply for accessories.
Choose pin configuration: 7-pin for basic use; 13-pin if you’ll use more lighting or trailer.
Inspect build quality: water-sealed connectors, reliable ground points, proper cable protection.
After installation: test all lights and signals, check dashboard for warning messages.

How to Order the Right Wiring Kit

Select your exact Jimny model in our shop (engine, trim, year, lighting type).
Choose between a 7- or 13-pin variant based on towing or extra electrical demands.
Ensure the kit includes socket, wiring harness, mounting accessories, and instruction manual.
If your vehicle has LED lighting or special equipment, check for compatible connectors or adapters.
When the product arrives: install per instructions and perform full test of all lighting & signal functions.

With a wiring kit from Weltmann KFZ-Teile for your Suzuki Jimny you get reliable components, dependable signal functionality, and legal compliance – ideal for off-road adventures, daily use, and towing.

FAQ – Frequently Asked Questions about Wiring Kits for Suzuki Jimny

Do I need a 7- or 13-pin wiring kit?

A 7-pin kit is sufficient for standard lighting and signal functions. If you plan to tow, use reversing lights, or add extra electrical devices, a 13-pin variant is better.

Are the wiring kits LED-compatible?

Yes, they work with factory LED tail lights or retrofit LED upgrades without errors or warning messages.

Is coding or activation required after installation?

No – in most cases not. Only for trims with special lighting/electronics setups might activation be necessary.

Can I install it myself?

Yes, with proper tools and some technical experience. For more complex versions or if in doubt, a workshop installation is advisable.

Are these wiring kits road-legal & TÜV-approved?

Yes – all wiring kits meet required legal & safety standards and are approved for road use over Germany/EU, including when used with trailers.

Filter products

Wiring Kits for Suzuki Jimny – Vehicle-Specific Complete Solutions