Wiring Kits for Toyota Proace Van Electric – Vehicle-Specific Complete Solutions

Welcome to the wiring kits category for the electric version of the Toyota Proace Van. This all-electric model combines strong electric drive with high payload and modern comfort. Ideal for commercial use, frequent transport tasks, and tow-enabled capability.

Key specifications: Two battery options are available – about 50 kWh or 75 kWh. Power around 100 kW (≈ 136 PS), with max torque around 260 Nm. Depending on battery and equipment, range under WLTP lies between ~ 140 and ~ 330 km. Exterior size approx. 4,960 mm length, 1,920 mm width, 1,890 mm height, with a wheelbase near 3,275 mm. Cargo volume about 5.3 m³; with optional Smart Cargo up to ~ 5.8 m³.

Your Benefits with Our Proace Van Electric Wiring Kits

Vehicle-specific & plug-and-play: Harnesses and connectors are tailored to the electric model—lights, body panels, equipment versions—without generic parts.
7- and 13-pin options: 7-pin covers standard lighting and signaling; 13-pin is better for trailers, reversing lights or additional electrical accessories.
LED compatible: Supports factory LED or retrofit lighting without flicker or warning errors.
Weatherproof & durable components: Sealed connectors, robust materials, and protected cable routing ensure long life and reliability.
Legal & safe: All kits meet legal requirements, are TÜV-approved, and are road-legal including trailer usage.

Technical Notes & What to Check Before Buying

Check which battery size your vehicle has (50 kWh or 75 kWh).
Consider your usage: will you tow, need reversing lights or extra power?
Choose the right pin count (7 or 13) accordingly.
Ensure connectors are well sealed and cable insulation is high quality.
After installation: test all light and signal functions and monitor any warnings.

How to Order the Right Wiring Kit

Select the exact Proace Van Electric version you have in our shop (battery, trim, body length, lighting).
Decide on 7- or 13-pin variant depending on whether you’ll need towing or extra accessories.
Make sure socket, wiring harness, mounting hardware and instructions are included.
Check compatibility with LED lighting or special equipment if applicable.
When you receive it: install according to the guide and perform a full function test of all lights and signals.

A wiring kit from Weltmann KFZ-Teile for your Toyota Proace Van Electric gives you reliable electric performance, precise fit, and legal compliance – perfect for demanding commercial, emission-free operation with towing capability.

FAQ – Frequently Asked Questions about Wiring Kits for Toyota Proace Van Electric

Do I need a 7- or 13-pin wiring kit?

7-pin is sufficient for standard lights and signals. For trailer use, reversing lights or extra electrical accessories, 13-pin is recommended.

Are these kits LED-compatible?

Yes – they work with both factory and retrofit LED rear lights without errors or flicker.

Is coding or activation required after installation?

No – usually not. Only special equipment packages may need activation.

Can I install the wiring kit myself?

Yes – with proper tools and experience. If unsure, a professional workshop is advised.

Are these kits road-legal & TÜV-approved?

Yes – all our wiring kits meet legal standards and are approved for road and trailer use including electric models.

Filter products