Wiring Kits for Toyota RAV4 III – Vehicle-Specific Complete Solutions

Welcome to the wiring kits category for the Toyota RAV4 III (XA30; production approx. 2005-2013). The RAV4 III is a mid-size SUV offered with optional four-wheel drive, multiple engine choices, and two body versions (short and long). It blends comfort, capability, and versatility.

Typical specifications: Length about 4,315 mm for the short wheelbase, width about 1,815 mm, height approximately 1,685-1,720 mm depending on trim. Wheelbase is ~ 2,560 mm. Engine outputs range from around 136 PS up to approx. 177 PS depending on fuel and model. Braked towing capacity can reach ~ 2,000 kg depending on equipment.

Your Benefits with Our RAV4 III Wiring Kits

Vehicle-specific & plug-and-play: Our harnesses and connectors fit exactly the RAV4 III’s rear lights, bumper, and body shape—no generic modifications needed.
7- and 13-pin options: 7-pin for standard lighting & signals; 13-pin for reverse light, accessory power or frequent trailer use.
Durable & weatherproof components: Sealed plugs, corrosion-resistant materials, and protected cable routing ensure long life, even under demanding conditions.
Safety & regulatory compliance: Our wiring kits meet legal requirements and are suitable for TÜV and legal towing applications.

Technical Notes & What to Check Before Purchase

Confirm vehicle edition: short or long version, year, engine type (gas or diesel), and trim.
Decide whether you need 7- or 13-pin based on whether you will tow, use reverse lights, or have extra electrical accessories.
Inspect existing connectors and cable routing for wear or corrosion, especially in the rear.
If LED lighting or retrofits are used, ensure wiring compatibility.
After installation: test all lighting & signal functions (indicators, brake, tail, reverse lights) and ensure no warning lights appear.

How to Order the Right Wiring Kit

Select your exact RAV4 III model in the shop (body version, engine, trim).
Choose 7- or 13-pin version depending on towing and accessories.
Check that socket, harness, mounting hardware, and instructions are included.
For LED or special lighting, select compatible variants.
Upon delivery: install per instructions and verify all functions.

A wiring kit from Weltmann KFZ-Teile for your Toyota RAV4 III gives you precise fit, reliable lights & signals, and legal safety – perfect for your SUV-and towing needs.

FAQ – Frequently Asked Questions about RAV4 III Wiring Kits

Do I need a 7- or 13-pin wiring kit?

7-pin is sufficient for standard lights and signals. If you plan to tow or use extra electrical functions, 13-pin is recommended.

Are the wiring kits LED-compatible?

Yes, our kits work with both standard and retrofit/hybrid LED lighting without conflict.

Is any coding required after installation?

No – usually not. Only special equipment or non-standard installations may require additional activation.

Can I install the wiring kit myself?

Yes, with appropriate tools and some tech experience. If unsure, a specialist workshop is advisable.

Are these wiring kits road-legal & TÜV-approved?

Yes – all offered wiring kits comply with legal requirements and are approved for road use including towing applications.

Filter products