Wiring Kits for Volkswagen Amarok II – Vehicle-Specific Complete Solutions

Welcome to the wiring kits category for the Volkswagen Amarok II. The second generation, introduced in 2023, offers modern diesel and V6 engines, braked towing capacity of up to approx. 3,500 kg, strong payloads, and robust build – perfect for towing, off-road or heavy duty use.

Key specifications: Length about 5,350 mm, width approximately 1,910-1,917 mm, height around 1,884-1,878 mm; wheelbase about 3,270 mm. Curb weight ranges between roughly 2,190 kg and 2,370 kg depending on model. Payload capacities in many versions reach 900-1,100 kg. Braked towing capacity is approximately 3,200-3,500 kg.

Your Benefits with Our Amarok II Wiring Kits

Vehicle-specific & plug-and-play: Harnesses and connectors are precisely tailored to rear lights, bumpers, and trim of your Amarok II.
7- and 13-pin options: 7-pin covers standard lighting needs; 13-pin is useful when reverse light, trailers or accessory power are needed.
LED-compatible & error-free: Our wiring kits work with factory LED rear lamps without warnings or flicker.
Robust & weatherproof: Weather-sealed connectors, corrosion-resistant materials and protected cable routing ensure durability, especially under tough conditions.
Standards-compliant & legal: All kits comply with road-legal regulations for trailers and are suitable for TÜV inspection.

Technical Notes & What to Check Before Buying

Confirm the exact version, engine (2.0 diesel or V6), drive configuration (2WD, 4Motion), and trim level.
Decide between 7- or 13-pin depending on if you tow often or need extra features like reverse light or constant power.
Inspect connectors and wiring at the rear for protection against moisture and corrosion.
Check whether your Amarok II has LED rear lights or optional lighting configurations and pick compatible kit.
After fitting, test all lights & signals (indicators, tail, brake, reverse lights) and check for any warning messages.

How to Order the Right Wiring Kit

Select your exact Amarok II version in the shop (engine, trim, options).
Choose 7- or 13-pin wiring kit depending on towing and lighting needs.
Ensure the kit includes socket, harness, mounting hardware, and installation guide.
If LED lighting is present, choose LED-compatible kit.
Upon receipt: install following instructions and perform full test of all lighting/signal components.

A wiring kit from Weltmann KFZ-Teile for your VW Amarok II delivers reliable fit, full functionality of lights and signals, and legal compliance – ideal for towing, rugged use, and heavy duty work.

FAQ – Frequently Asked Questions about Amarok II Wiring Kits

Do I need a 7- or 13-pin wiring kit?

7-pin is sufficient for standard lighting. For trailers, reverse lights or accessory power, 13-pin is recommended.

Are the wiring kits LED-compatible?

Yes – compatible with both factory LED tail lamps and LED upgrades without warnings.

Is any coding or activation required after installation?

No – usually not. Only certain optional equipment or special lighting packs may require activation.

Can I install the wiring kit myself?

Yes, with proper tools and some technical knowledge. If unsure, a professional installer is advised.

Are these wiring kits road-legal & TÜV-approved?

Yes – all wiring kits meet legal standards and are approved for trailer use.

Filter products